How To Install A Panel Heater In 5 Steps

Installing a panel heater in your home is a great way to ensure you stay warm and cozy during the cold winter months. It’s also relatively easy and can be done in just five simple steps. In this blog post, we will provide a step-by-step guide on how to install a heater panel. We will offer tips and tricks to help make the process as easy as possible. So read on to learn more about installing a heater panel in your home.

What is A panel heater?

A panel heater is an efficient and cost-effective way to heat any room in your home. Heater Panels are wall-mounted heating units in various sizes, designs and materials. They use convection to heat the air around them, circulating the warm air throughout the room. Heaters are easy to install, safe to use and can be adjusted to your desired temperature. Plus, they’re energy-efficient and cost-effective, so you’ll save money on your utility bills. Whether you’re looking for a way to keep your home warm during the winter or add extra warmth to a specific area of your home, a heater panel is a great option.

Choose The Right Location

When selecting the ideal location for your heater panels, several factors must be considered. First and foremost, the wall should support the heater’s weight. If it cannot, you must use a different wall or mount it on the floor. Additionally, make sure that the location is close to an electrical outlet to easily connect it.

It’s also important to keep safety in mind. Avoid placing it too close to furniture, curtains, or any other combustible materials. It’s best to place it away from children and pets as well. The ideal location should provide a good level of heat distribution while ensuring its safety. That said, try to avoid areas where drafts are likely, such as near windows or air vents. It’s essential that the area is dry and not prone to moisture buildup. It means avoiding bathrooms and basements, since those areas tend to have high humidity levels. For optimal performance, choose a spot where airflow won’t be obstructed by furniture or draperies.

Once you’ve found the right spot for your heater panel, use a stud finder to locate studs in the wall. It is crucial for providing adequate support for the unit. Mark these spots with a pencil before beginning installation. With this done, you can now start attaching mounting brackets to the wall with screws. Make sure they are firmly secured before continuing with the installation. Finally, attach the heater panel with additional screws until it’s securely mounted. You should now have a secure and properly installed heater panel ready!

Prepare The Wall

Before you hang the bracket, it’s essential to prepare the wall. This step is critical to ensure your heater panel is securely mounted and safe from damage.

Start by measuring the area where you want to mount the heater panel. Then, mark off the area with a pencil or marker. Next, use a power drill to make four holes into the wall. You will need these holes for the mounting bracket screws.

When drilling the holes, make sure they are slightly larger than the diameter of the bracket screws. This will give the bracket screws a snug fit when you install them. Once all four holes have been drilled, insert wall anchors in each hole and press firmly until the anchor is flush with the wall.

Once your wall is prepped, you’re ready to hang the bracket. Make sure to follow the manufacturer’s instructions carefully when hanging the bracket. It’s also a good idea to double-check that your heater panel will fit in the space before you secure it to the wall.

Hang The Bracket

The next step in installing your heater panel is to hang the bracket. Before doing so, check if the brackets included with your heater are appropriate for your wall type. Once you’ve verified that the bracket is suitable, you can hang it on the wall.

Begin by marking where the bracket should be placed and then drill two small holes into the wall to secure the bracket. Make sure to use a level to ensure the bracket is even.

Once the holes are drilled, place the bracket into position and secure it using the provided screws and anchors. Make sure to firmly tighten the screws to ensure the bracket is securely fastened to the wall.

After the bracket is secured, mount your heater panel onto it. Place the heater over the bracket and secure it using the provided bolts. Make sure to securely tighten these bolts, which will help keep your heater panel safely in place.

Connect The Wiring

The next step in installing a heater panel is connecting the wiring. It requires some basic knowledge of electrical systems, so if you’re unsure about doing this yourself, it’s best to get an electrician to help. To start with, turn off the power from the main switchboard. Then, you’ll need to identify the wires of your heater panel – these will typically be marked as “live” and “neutral”. Connect these to the corresponding wires in the wall – again, you may want to check these with an electrician first. Finally, connect the earth wire if your heater panel is fitted with one. After this, you can mount the heater panel on the wall. Use the appropriate fixings depending on the material of the wall. For example, use plastic raw plugs for plasterboard walls. Place the panel at the desired height and mark where the screws should go. Drill pilot holes into the wall using a suitable drill bit before inserting the raw plugs. Make sure that all screws are properly secured into the raw plugs.

Once this is done, attach the heater panel to the wall using screws and tighten them firmly. Be careful when tightening the screws, as you don’t want to over-tighten them and cause damage to the heater panel or the wall. Now, you’re ready to plug in the heater panel and test it out. Turn the power back on from the main switchboard and plug in the unit. Check that there is no buzzing sound from the unit and ensure the cables remain secure throughout this process. When finished, back the wall plate over any visible cable connections and tidy up any excess wires or cords. Your heater panel should work correctly now and provide much-needed warmth in your home during colder months!

Mount The Panel Heater

Once all the preparations are done, it’s time to mount the heater. Before doing so, ensure the wall is sturdy, and the bracket is firmly attached.

To mount the panel, locate the four mounting screws on the back of the unit. These should be positioned in each corner of the frame.

Attach the screws to the wall using a drill, ensuring they are securely in place. Once all four screws have been mounted, place the heater over them and secure it to the wall with the remaining screws.

Tighten the screws to ensure the heater panel is mounted firmly and will not become loose over time. Using an extra set of hands when climbing the panel heater may be a good idea, as this can make it much easier to handle.

Once all the screws have been tightened, your heater is ready for use. Make sure to regularly check that all the screws remain tightly in place to ensure that the heater continues to work safely and efficiently.

Conclusion

Installing a heater panel can be a great way to keep your home warm and energy-efficient. Following these steps, you can easily install a heater and enjoy its comfort. Remember always to follow safety procedures and make sure that your heater panel is correctly connected.